Automatic measuring and control station for swimming pools Bayrol PoolRelax Oxygen
- Designed for oxygen water treatment in private pools and spa tubs up to 150 m3
- It automatically measures and regulates the pH of the water and oxygen, maintaining both values at the desired level.
- It is possible to switch from chlorine to oxygen and vice versa during operation, but this requires the fitting of a suitable replacement kit.
- The station received a new housing and a slightly larger peristaltic pump compared to the previous version, while the tried-and-tested menus and operation remained unchanged.
- The PoolRelax oxygen station is equipped with a proportional controller that controls the pH and oxygen peristaltic pumps by means of the length of the dosing pulses, i.e. by varying the pump switch-on time. The station's menu makes it possible to set the relevant setpoints for pH and redox, a proportional range depending on the size of the pool, measurement value alarms (top/bottom), dosing time and many other parameters necessary to ensure precise and reliable dosing.
- The PoolRelax Oxygen station has two peristaltic pumps for dosing pH corrector and Oxygen, each with a capacity of 1.5 l/h at 1.3 bar.
- The Bayrol PoolRelax station has a compact design with a small footprint for installation in very small spaces. The station's components are covered by a protective cover to prevent dirt and accidental damage. Made of acrylic, the measuring vessel is illuminated by a blue LED for easy monitoring of the water flow in low light conditions.
- The station is equipped with a large LCD screen which, together with a logical menu structure, ensures simple and intuitive operation. All indications and messages are clearly presented on the display.
- A power-saving mode switches off the display after 15 minutes.
- The station's processor records all relevant events such as switch-on/switch-off, calibrations, alarms, parameter changes or resets in a logbook with date and time. This makes it possible to analyse the workflow of the pool plant and any abnormalities that occur.
- The station is equipped with precision measuring systems with pH and oxygen potential measuring electrodes (PoolRelax Oxygen).
- A pre-filter is used as standard equipment and guarantees the flow of clean water through the measuring vessel.
- Additionally, a PoolConnect module can be purchased for PoolRelax stations, which allows full data exchange between the station and a mobile phone via text messages (SMS). As a result, it is possible to remotely read measurement values, alarms, delete alarms and modify station settings from anywhere using a mobile phone.
Technical data for Bayrol PoolRelax Oxygen stations
Power supply: | 110 - 240 V, 50/60 Hz, separate power supply for peristaltic pumps |
Power consumption: | 30 W |
Ambient temperature: | - 10° to + 60° C |
Station (board) dimensions: | 440 x 361 x 125 mm (width x height x depth) |
Indications: | High-resolution, monochrome four-line display with blue backlighting, automatic display switch-off function after 15 minutes to save energy |
Language setting: | Polish, German, English, French, Spanish, Italian, Russian, Slovak, Czech |
Flow control: | by means of an inductive sensor |
Types of alarms: | upper and lower measuring values, flow, container level, dosing time (regulation), regulation (dosing) delay, automatic dosing lock at critical alarms |
Protection class: | IP 54 |
Technical data of the pH measurement system
Measuring range: | 0 - 10.00 pH (temperature-compensated) |
Measurement accuracy: | maximum +/- 0.2% of the measurement range value |
Reading accuracy: | 0,01 pH |
Regulator type: | proportional, two-way control possible (pH-Minus/pH-Plus) |
Calibration: | one or two-point method |
Proportionality range: | can be set from 0% to 100% |
Adjustment parameters: | setpoint, alarm thresholds, maximum dosing (control) time, proportionality range, dead zone for two-way control, pulse (timing) time, minimum activation time of the dosing pump |
Pump control: | Voltage-free or relay output 230 V, max 2 A with modulation of the dosing pulse length (dosing time) or pulse frequency (for pulse pumps - max 240 pulses per minute), permanent indication of the current dosing quantity |
The pH electrode and its connection: | glass rod@ BNC connector |
Contents of the package
Each station is supplied in a cardboard box containing all the materials needed to assemble the station:
- station,
- pH and redox electrode (for PR Chlorine only),
- buffer solutions pH 7.0 and pH 4.0 and 650 mV (for PR Chlorine only),
- electrode cleaning fluid,
- 3/8" taps for tap water connection,
- measuring water pipes from PE 10x8 mm (2x2 m),
- ½" foot valves with filters and level sensors and ½" metering valves for each pump,
- PVC suction pipe 4x6 mm (2 m for each pump),
- PE discharge pipe 4x6 (2 m for each pump),
- fixing pins,
- operating manual.

Need help?
If you have not found the answer to your inquiry, please use the form below and write how we can help you?. We provide quick contact and comprehensive service.

Chemicals for the SPA bathtub | Jacuzzi - which one to choose and how to use?
Carefree relaxation in the jacuzzi is only one side of the coin. Safe use of a SPA bathtub requires regular cleaning and maintenance. We will suggest which chemistry to choose and how it should be used. Thanks to this, you will be able to enjoy clean and safe water.
Read more
Tomasz Tomkowicz
Pool Technology Specialist
Thank you for reading our article, if you have more questions or need more specialized help - write to me using the form.
Jestem bardzo zadowolona z usług tej firmy. Każdy nam odmawiał pomocy, nawet firma montująca basen. Pool system zjawił się i doprowadził basen sprzed paru lat do stanu używalności, co więcej dokonał napraw uszczelniających co spowodowało ze basen stał się w pełni sprawny. Naprawdę polecam !

Bardzo miła i sympatyczna obsługa oraz fachowe doradztwo techniczne.

Bardzo profesjonalna i cierpliwa obsługa. Odbierają telefony, wszystko dokładnie wytłumaczą, wysyłają praktycznie na drugi dzień każdą część którą potrzebuje klient. Pan Krzysztof z serwisu rzetelnie podpowie co zrobić i jak rozwiązać swój basenowy problem, jeśli chcemy majstrować przy basenie sami. Pan Paweł i Marcin też skarbnica wiedzy technologii basenowej. Dobre ceny. Polecam firmę i pozdrawiam zespół POOLSYSTEM

Jak budujesz basen to to miejsce jest dla ciebie, osprzęt, doradztwo i miła obsługa.

Super obsługa doradzi pomoże,ceny na duży plus .Polecam

Bardzo mili ludzie, to naprawdę profesjonaliści. Nie lubię zakupów, ale spotkanie z Nimi było bardzo przyjemne.
